The TSL series horizontal rotary tables are for indexing,circular cutting,angle setting,boring,spot facing operations and similar work in conjunction with a milling machine.This type rotary table is so designed as to permit machining operations at a higher dimension than that of TS type rotary table.The base can be used in a vertical position to enable to carry out center work with the help of tailstock. |
A flange for connecting scroll chuck is special supplied,and be packed independent.For special order,the dividing plates accessory allows the operator to accurately dvide the 360° rotation of the clamping surface into divisions of 2 through 66,and all divisible of 2,3 and 5 from 67-132 |
Model | TSL100 | TSL160 | TSL200 | TSL250 | TSL320 | TSL400 |
Table diameter | ¢100 | ¢160 | ¢200 | ¢250 | ¢320 | ¢400 |
Morse taper of the center hole | 2# | 2# | 3# | 4# |
Diameter of the center hole | ¢25X8 | ¢25X6 | ¢30X6 | ¢40X10 |
Height of center for Verti. Mounting | 70 | 125 | 150 | 170 | 210 | 260 |
Width of the T-slot | 6 | 10 | 12 | 14 |
Adjacent angle of table T-slot | 90° | 60° |
Width of the locating key | 10 | 12 | 14 | 18 |
Modules of worm and worm gear | 1 | 1.5 | 1.75 | 2 | 2.5 | 3.5 |
Transmission ratio of the worm gear | 1/72 | 1/90 | |
Graduation of the table | 360° |
Readout of the handwheel | 2' | 1' |
Minimum value of vernier | 10'' |
Indexing accuracy | 120'' | 80'' | 60'' |
Max. bearing(with table Hor.) | 20 | 100 | 150 | 200 | 250 | 300 |
Max. bearing(with table Ver.) | 10 | 50 | 75 | 100 | 125 | 150 |
Net Weight | 7 | 23 | 31.5 | 46 | 77 | 150 |
Gross Weight | 8 | 30 | 42 | 57 | 92 | 175 |
Case dimensions | 245x165x112 | 432x432x220 | 450x440x235 | 510x460x240 | 590x580x250 | 750x684x286 |